top of page
Fuel Level Sensor for Vehicle
SKU#
CAP10
Replaced by
Replaced SKU
PulseCAP10 is a Smart fuel level sensor, was invented & manufacrured since 2010, up to now there have been 50000 pieces of sensor delivered to Vietnam, Malaysia, Singapore, Phillipines, Indonesia, India, Mexico, USA... PulseCAP10 fuel level sensor utilitizes the unique digital capacitance measuring technique of Daviteq, deliver high accuracy measurement and stability. It has multiple outputs, can work with many kind of GPS devices in over the world.
For Applications
Energy Monitoring, Fuel Monitoring, Vehicle Tracking
99.5% Accuracy
Patented digital capacitance measuring technique PulseCAP10 of Daviteq allow high accuracy
No need Calibration after cutting
Smart Firmware allow automatically recognize its new length after cutting. No need complicated calibration steps!!!
High Stability
Patented digital capacitance measuring technique PulseCAP10 of Daviteq with smart mechanical structure allow very high stable measuring output
Easy Installation
Smart design for easy installation and complete protection of sensor from tampering
| Sensor length | standard 700mm, 1000mm, optional 1200. Field cuttable down to 200mm. Longer than 1500mm, suggest to use Industrial type sensor CAP10CN |
| Output | Analog (1∼5VDC), RS232 (S2 protocol), PWM |
| Power supply | 8∼50VDC |
| Consumption | max 15mA |
| Working pressure | -1∼2 barg |
| Working temperature | -20∼85℃ |
| Accuracy | ±0.5% of span (at 25℃) |
| Temperature drift | < + 0.03% of span per 10℃ |
| Resolution | 1‱ of span |
| Sensor materials | Alloy & Engineering plastic |
| Electrical connection | 3-way connector IP67 from MOLEX with 7m shielded cable as standard |
| Housing | Cast alumium, IP67 protection |
| Process connection | Plastic flange |
| Standard accessories | flange, o-ring, gasket, protection covers, self-tapping screws, twisted seal, fuse & fuse holder |
| Certification | CE-Marking per EN61236-1 (with test report) |
Dimension
1/0
Application Notes
test
bottom of page