top of page
Fuel Level Sensor Resistive Output for Genset
SKU#
CAP10G
Replaced by
Replaced SKU
CAP10G is the industrial version of PulseCAP10, designed specifically for generator fuel monitoring applications. The CAP10 has 240∼33Ω resistor output allowing direct connection to a generator controller. It is compatible with most popular generator controllers on the market such as DEEPSEA, EMKO, DATAKOM, COM AP, MGS, SMART GEN, WOODWARD, POWERCOMMAND... CAP10G with high precision up to 0.5%. Measuring range from 100∼1500mm. The sensor has CE EMC certification according to EN61236-1 standard.
For Applications
Energy Monitoring, Fuel Monitoring
Direct connection with Generator
Compatible with most popular generator controllers on the market such as DEEPSEA, EMKO, DATAKOM, COM AP, MGS, SMART GEN, WOODWARD, POWERCOMMAND ...
High stability
Patented digital capacitance measuring technique PulseCAP10 of Daviteq combined with intelligent sensor structure design for high stability signal
99.5% Accuracy
Patented digital capacitance measuring technique PulseCAP10 of Daviteq allow high accuracy
No need Calibration after cutting
Smart Firmware allow automatically recognize its new length after cutting. No need complicated calibration steps!!!
| Sensor length | Standard 700mm, optional 1200 or 1500mm. Cuttable down to 200mm. Longer than 1500mm, suggest to use Industrial type sensor CAP10CN |
| Output | 240∼33Ω |
| Power supply | 8∼50VDC |
| Consumption | max 20mA |
| Working pressure | -1∼2 barg |
| Working temperature | -20∼85℃ |
| Accuracy | ±0.5% of span (at 25℃) |
| Temperature drift | < + 0.03% of span per 10℃ |
| Resolution | 1‱ of span |
| Sensor materials | Alloy & Engineering plastic |
| Electrical connection | 3-way connector IP67 from MOLEX with 3m shielded cable as standard |
| Housing | Cast alumium, IP67 protection |
| Process connection | Plastic flange |
| Standard accessories | flange, o-ring, gasket, protection covers, self-tapping screws, twisted seal, fuse & fuse holder |
| Certification | CE-Marking per EN61236-1 (with test report) |
Dimension
1/0
Application Notes
test
bottom of page