top of page
Modbus Output Single Axis Piezo-Electric 10kHz Vibration Sensor
SKU#
MBRTU-V1A
Replaced by
Replaced SKU
MBRTU-V1A is a cost-effective accelerometer single-axis vibration sensor designed for condition monitoring and preventive maintenance applications. The Piezo-Electric accelerometer is available in ranges ±25g or 50g and features a flat frequency response up to >10kHz. Its accelerometer features a stable piezo-ceramic crystal in shear mode with low-power electronics, sealed in a fully hermetic package. The Piezo Electric technology incorporated in the MBRTU-V1A accelerometer has a proven track record for offering the reliable and long-term stable output required for condition monitoring applications. The accelerometer is designed and qualified for machine health monitoring and has superior Resolution, Dynamic Range, and Bandwidth to MEMS devices. Besides that, it can also measure the temperature at the mounting point. It can be powered by a wide range 9∼36VDC supply and give output RS485 with ModbusRTU protocol.
For Applications
Condition Based Monitoring, Machine Health Monitoring, Safety Monitoring, Vibration Monitoring
Modbus communication
Connect to any PLC, Devices via RS485 Modbus RTU protocol
High Performance Piezo-electric sensor
Wide bandwidth up to 10000Hz. Hermetically Sealed, Piezo-Ceramic Crystal, Shear Mode accelerometer sensor is designed and qualified for machine health monitoring and has superior Resolution, Dynamic Range and Bandwidth to MEMS devices.
High resonant frequency
Compact cylindrical stainless steel housing gives resonant frequency > 12 KHz.
For Indoor and Outdoor
IP67 rating design for extreme condition environment.
| Sensor technology | Hermetically Sealed, Piezo-Ceramic Crystal, Shear Mode |
| 8-Parameter Measurement | Acceleration RMS & Peak Velocity RMS & Peak Displacement RMS & Peak Frequency & Temperature |
| Acceleration range and resolution | ±25G, 6.1mg |
| Velocity range and resolution | 0∼50 mm/s, 0.1mm/s |
| Displacement range and resolution | ±5000μm, 1μm |
| Frequency range and resolution | 2∼10000 Hz, 1 Hz |
| Acceleration Range & Shock Limit (g) | ±25 or 50, 10000 |
| Frequency Response and Resonant (Hz) | 2∼10000, > 30000 |
| Non-Linearity, Transverse Sensitivity | ±2% FSO, < 5% |
| Temperature measuring and operating | -40∼85℃, with accuracy: ±0.5 and resolution: 0.125 |
| Sensor Material, rating and mounting | 304SUS, IP67, M6 Screw |
| Output | RS485, Modbus RTU |
| Supply | 9∼36VDC @ max 200mA |
| Connector | M12-M 4-pin (Coding A) |
| Working temperature | -40∼85℃ |
| Dimensions & Net-weight | Diameter 40mm x Height 50mm, 190g |
| (* Note: All above values are typical at +24℃, 80Hz) |
Dimension
1/1
Application Notes
test
bottom of page