top of page
Wireless Sensor AC Current Input
SKU#
WS433-AC
Replaced by
Replaced SKU
Wireless sensor with 1-channel AC current input 5A to measure the AC current load of your motors, machines... to count the energy consumption, OVER-load or NO-load detection, run hour counting…It is configured the operation parameters like data sending interval, health check cycle... remotely from Globiots platform or via ModbusRTU software. The wireless module can last up to 10 years with a single AA battery.
For Applications
Condition Based Monitoring, Machine Health Monitoring, Safety Monitoring, Energy Monitoring, Production Monitoring
Reliable & Secured Wireless Connection
Sub-Ghz technology from Texas Instruments allows reliable wireless connection and secured data by AES-128
Work with common Current Transformers
Allows to setup the ratio of current transformer
10-year with a single battery
Ultra-low power sensing technology from Daviteq with Ultra-low power wireless technology fromTexas Instruments allow the sensor can last up to 10 years with a single battery AA.
Long range Transmission
Narrow Band techniques & Sub-Ghz technology allow long distance transmisison at lowest energy consumption
| Measuring range | 0∼5A AC |
| Accuracy | 1.0% |
| Resolution | 10 -bit |
| Temperature Drift | < 100 ppm |
| Electrical connection | cable 0.5m length with PG9 cable gland and wire crimpping connectors for SAFETY |
| Optional accessories | 304SS Adapter PG9/male 1/2""NPT or PG13.5 or M20 to allow direct mounting on Process instruments or electrical panel |
| Data speed | Up to 50kbps |
| Tranmission distance, LOS | 500m |
| Antenna | Internal Antenna, 3 dbi |
| Battery | 01 x AA 1.5VDC, up to 10-year operation, depends on configuration |
| Frequency Band | ISM 433MHz, Sub-GHz technology from Texas Instrument, USA |
| Receiving Sensitivity | -110dBm at 50kbps |
| International Compliance | ETSI EN 300 220, EN 303 204 (Europe) FCC CFR47 Part15 (US), ARIB STD-T108 (Japan) |
| Security Standard | AES-128 |
| Operating temperature of PCB | -40∼60℃ (with AA L91 Energizer®) |
| Housing | Poly-carbonate, IP67 |
| Installation method | L-type bracket SUS304 , by M4 screws or double-sided 3M tape (included) |
| Product dimensions | 125x30x30mm |
| Net weight (without battery) | < 100g |
| Box dimension | 190x50x50mm |
| Gross weight | 140g |
Dimension
1/0
Application Notes
test
bottom of page