top of page
Only available for Logged-in member. Please login or register to access this information
Manual for WSLRW-G4 | FW7
Build-to-Order
Replaced by
Replaced by
Item codes | FW Released Date | Changes Information |
|---|---|---|
WSLRW-G4-CL2-20-01; WSLRW-G4-CO-200-01; WSLRW-G4-H2S-50-01; WSLRW-G4-NH3-100-01; WSLRW-G4F-CL2-20-01; WSLRW-G4F-CO-200-01; WSLRW-G4F-H2S-50-01; WSLRW-G4F-NH3-100-01; WSLRWEX-G-H2S-100; WSLRWEX-G-O2-30-HH | 26/01/2024 | 1.Add LNS_CHECK message with message type: ConfirmedDataUp.; 2.Add password requirement for some parameters when writing with offline tool.; 3.Add low alarm and RANGE_FACTOR_INDEX.; 4.Add MODULE_POWER_MODE: 0 => For G4 (NH3, H2S, CL2), 1 => For O2; 5. Add configurable unit.; 6.Add num of sample.; 7.Add Response time for sensor O2 |
1
QUICK INSTALLATION GUIDE
1.1 Introduction
1.2 Application Notes
1.3 When does device send Uplink messages?
1.4 Default Configuration
1.5 Battery/ Power Supply
1.6 What's in the Package?
1.7 Guide for Quick Test
1.8 Installation
1.9 Payload Document and Configuration Tables
1.10 How to connect device to Back-end/ Network Server/ Coordinator
2
MAINTENANCE
2.1 Troubleshooting
2.2 Maintenance
3
ADVANCED GUIDE
3.1 Principle of Operation
3.2 Configuration
3.3 Calibration/ Validation
4
PRODUCT SPECIFICATIONS
4.1 Specifications
5
WARRANTY & SUPPORT
5.1 Warranty
5.2 Support
bottom of page