top of page
Only available for Logged-in member. Please login or register to access this information
Manual for WSLRW-PPS | FW3
Normally Stock
Replaced by
Replaced by
Item codes | FW Released Date | Changes Information |
|---|---|---|
WSLRW-PPS-G050-01; WSLRW-PPS-G1-02; WSLRW-PPS-G1-03; WSLRW-PPS-G10-02; WSLRW-PPS-G10-04; WSLRW-PPS-G100-03; WSLRW-PPS-G20-02; WSLRW-PPS-G250-03; WSLRW-PPS-G40-02; WSLRW-PPS-G400-03; WSLRW-PPS-G70-03 | 31/01/2024 | 1.Add LNS_CHECK message with message type: ConfirmedDataUp.; 2.Add password requirement for some parameters when writing with offline tool.; 3.Add SENSING_MODULE_TYPE.; |
1
QUICK INSTALLATION GUIDE
1.1 Introduction
1.2 Application Notes
1.3 When does device send Uplink messages?
1.4 Default Configuration
1.5 Battery/ Power Supply
1.6 What's in the Package?
1.7 Guide for Quick Test
1.8 Installation
1.9 Payload Document and Configuration Tables
1.10 How to connect device to Back-end/ Network Server/ Coordinator
2
MAINTENANCE
2.1 Troubleshooting
2.2 Maintenance
3
ADVANCED GUIDE
3.1 Principle of Operation
3.2 Configuration
3.3 Calibration/ Validation
4
PRODUCT SPECIFICATIONS
4.1 Specifications
5
WARRANTY & SUPPORT
5.1 Warranty
5.2 Support
bottom of page