top of page
Only available for Logged-in member. Please login or register to access this information
Manual for WSSFCEX-PPS | FW6
Build-to-Order
Replaced by
Replaced by
Item codes | FW Released Date | Changes Information |
---|---|---|
UPG-WSSFCEX-PPS-10; UPG-WSSFCEX-PPS-100; UPG-WSSFCEX-PPS-200; UPG-WSSFCEX-PPS-300; WSSFCEX-PPS-G10-01; WSSFCEX-PPS-G100-01; WSSFCEX-PPS-G1000-01; WSSFCEX-PPS-G20-01; WSSFCEX-PPS-G200-01; WSSFCEX-PPS-G400-01 | 10/06/2024 | Change new HW (HW 3); Update cycle of 15-minute for cyclic data, measure period, and alarm period; Add RC3, RC5, RC6, RC7; Add OTHER_INFOR, PRODUCTION_CYCLE, RAW_VALUE, SCALED_VALUE |
1
QUICK INSTALLATION GUIDE
1.1 Introduction
1.2 Application Notes
1.3 When does device send Uplink messages?
1.4 Default Configuration
1.5 Battery/ Power Supply
1.6 What's in the Package?
1.7 Guide for Quick Test
1.8 Installation
1.9 Payload Document and Configuration Tables
1.10 How to connect device to Back-end/ Network Server/ Coordinator
2
MAINTENANCE
2.1 Troubleshooting
2.2 Maintenance
3
ADVANCED GUIDE
3.1 Principle of Operation
3.2 Configuration
3.3 Calibration/ Validation
4
PRODUCT SPECIFICATIONS
4.1 Specifications
5
WARRANTY & SUPPORT
5.1 Warranty
5.2 Support
bottom of page