top of page
LoRaWAN Ex d PID Gas Sensor
SKU#
WSLRWEX-PID
Replaced by
Replaced SKU
WSLRWEX-PID is a LoRaWAN sensor with Ex d explosion-proof approval and comes with a built-in high-performance PID (photoionisation detectors) technology sensor to detect the Volatile Organic Compounds (VOCs) and Hydrocarbon Gases in the air. It comes with Local LCD display, multi-colored status display, and magnet buttons for easy operation at field, without the need of turn off power and hot work permit. With 10.6 eV lamp allowing the instrument to detect a wide range of VOC gases whereas the TAC version utilises a 10.0 eV lamp to detect Total Aromatic Compounds (TACs), which helps focus on benzene. For LoRaWAN connectivity, it supports global frequency bands EU868, IN865, RU864, KR920, AS923, AS923-2, AU915, US915. The sensor can work perfectly with any LoRaWAN Gateway on the market. The PID gas sensor are ideal for detecting VOCs and TACs in areas such as refineries and petrol chemical facilities.
For Applications
Gas Leakage Detection, Ambient Air Quality Monitor, Indoor Air Quality Monitor, Gas Analyzing, Warehouse Monitoring
LoRaWAN communication
Support LoRaWAN Class A, connect to any LoRaWAN gateway on the market
Easy operation at Field by LCD
Built-in LCD display, multi-colored status display, and magnetic button for easy operation and services
High Performance PID Gas Sensor
Advanced PID sensor provides stable and accurate output
Ex Solar Powered
The sensor is tested and pre-configured in factory before shipping
| Measurement technology | Daviteq high-performance PID gas sensor |
| Measured Gases | VOCs and Hydrocarbons (1000+ types of VOC and gas) |
| Principle and Sensor Specification | Please follow this link |
| Relative humidity range | 0∼99% RH, non-condensing |
| Operating Temp Range | -40∼55℃ (except 0∼40℃ for Range 3ppm sensor) |
| COMMUNICATION | |
| SF factors | SF7∼SF12 |
| Antenna | 2 dbi external antenna N-type |
| RF power and frequency | 860∼930MHz, 14∼20dBm, configurable for zones: EU868, IN865, RU864, KR920, AS923, AS923-2, AU915, US915 |
| Protocol | LoRaWAN® Class A V1.0.3 |
| Data sending mode | cyclically, or when an alarm occurs or activated by a magnetic key. |
| RF module compliant | ETSI EN 300 220, EN 303 204 (Europe) FCC CFR47 Part15 (USA), ARIB STD-T108 (Japan) |
| Device certification | CE or FCC on demand |
| Configuration | via Local LCD, or Downlink or via USB cable (PC software provided free of charge) |
| Power supply | 12∼35VDC, max 200mA by external DC supply or Ex approved Solar Power Skid (as below ordering information) |
| Equipment housing | Aluminum alloy, powder coated, IP66, Wall mount installation |
| Certified Ex d | IMQ 14 ATEX 005 X, TÜV CY 18 ATEX 0206158 X and IECEx DEK 15.0048X |
| Hazard Protection Label | ATEX II 2G Ex db IIC T5/T6 Gb and ATEX II 2D Ex tb IIIC T100/T85℃ Db |
| Compatible | ATEX 2014/34/EU/ Standard IEC-EN60079-0 IEC-EN60079-1 IEC-EN60079-31 |
| Areas of application | Zones 1 & 2 gas hazardous areas, Zones 21 & 22 hazardous areas containing flammable dust |
| Size | Net weight | H220xW100xD80 (not including antenna)/ ≈1500g |
| Mounting type | Wall mount |
Dimension
LoRaWAN Exd PID Gas Sensor WSLRWEX-PID-H5_edited.jpg
LoRaWAN Exd PID Gas Sensor WSLRWEX-PID-H5_edited.jpg
1/1
Application Notes
test
bottom of page