top of page
Sigfox Gas Sensor with Siren for Industrial Safety
SKU#
WSSFC-GCB
Replaced by
Replaced SKU
WSSFC-GCB is a Sigfox-ready sensor designed to measure flammable or toxic gas concentrations. It features high-performance, ultra-low-power gas sensing technology to accurately detect specific gas concentrations in the air. Additionally, the sensor includes a built-in siren for local alarm notifications and a button for local alarm acknowledgment. Its ultra-low-power design and smart firmware enable the sensor to operate on a single battery for 5-10 years. It supports Sigfox zones RC1, RC2, RC3c, RC4, RC5, RC6, and RC7, making it versatile for global use. The sensor is ideal for monitoring gas concentrations in industrial or commercial buildings in the areas of kitchens, parking garages, boiler rooms, laboratories, basements, HVAC rooms, utility rooms, industrial workspaces and more.
For Applications
Indoor Air Quality Monitor, Gas Analyzing, Warehouse Monitoring, Gas Leakage Detection
Sigfox-Ready
Support Sigfox Zones RC1-RC7
High Accuracy & Stable
Advanced Electrochemical-type and Non-Dispersive Infrared gas sensor technology processing to deliver high accuracy and stable measurement
5-10 years battery
Daviteq's ultra-low power sensing and wireless technology, smart firmware allow the sensor can last up to 5-10 years with 01 battery
Local alarm
Local alarm sound & light notification and local alarm acknowledgement
| Type of measuring gas | Choose 1 of CH₄, C₃H₈,CO, Cl₂, H₂S, H₂, NH₃ gases |
| Measurement technology | High performance Non-Dispersive Infrared (NDIR) sensor or high performance Electro-Chemical sensor |
| Measuring range | CH₄ 0-100% LEL, C₃H₈ 0-100% LEL, CO 0-500ppm, H₂S 0-100ppm, H₂ 0-1000ppm, NH₃ 0-100ppm, Cl₂ 0-20 ppm |
| Resolution | 0.1% or 0.1ppm, 0.01ppm |
| Reading stability | For C₃H₈ and CH₄, refer Daviteq's NIDR gas sensor link: |
| For CO, Cl₂, H₂S, H₂, NH₃, refer Daviteq's Electro-Chemical gas sensor link: | |
| Sensor working temperature | -20∼60°C |
| Sensor Working humidity | 15-90% RH, non-condensing |
| Operating pressure | 80kPa to 120kPa |
| Local functions | Alarm sound and alarm acknowledgement |
| Sigfox regions supported | RC1∼RC7 |
| Antenna | External antenna |
| Data sending mode | Cycle, alarm and magnet key. |
| RF module compliant | ETSI EN 300 220, EN 303 204 (Europe) FCC CFR47 Part15 (USA), ARIB STD-T108 (Japan) |
| Configuration | Via downlink (only for some configurations) or USB cable (PC software provided free of charge) |
| Battery | 01 x LiSOCl₂ 3.6V battery |
| Housing | ABS, IP40 |
| Dimensions | H80xW150xD50 (without battery) |
| Net weight | < 300 grams (without battery) |
| Installation | Wall mounting with screws |
Dimension
1/1
Application Notes
Select the suitable sensor range to get the highest accuracy vs. sensor life. Please consult our engineers.
Lifetime is 7 years for NDIR sensors, depending on sensor type and actual operating conditions.
Calibration cycles are about 30 months for the NDIR sensor, depending on actual operating conditions.
Check carefully the working temperature and humidity of the application.
Lifetime is 7 years for NDIR sensors, depending on sensor type and actual operating conditions.
Calibration cycles are about 30 months for the NDIR sensor, depending on actual operating conditions.
Check carefully the working temperature and humidity of the application.
bottom of page