top of page
Only available for Logged-in member. Please login or register to access this information
Manual for WSLRW-MB485 | FW2
Normally Stock
Replaced by
Replaced by
Item codes | FW Released Date | Changes Information |
|---|---|---|
WSLRW-MB485-01; WSLRW-C-RS485-01 | 18/11/2024 | 1.Update hardware boost output power; 2.Update CYCLIC_FREQ_FACTOR and PRODUCTION_FREQ_FACTOR _W_PASSWORD; 3.Update parameter POWER_OUTPUT_MODE and enabling a configuration via downlink; 4.Add downlink type 3, 4; 5.Add CONFIG_CHECK message for downlink type 3, 4 and 5; 6.Update downlink type 5 for default frequency; channel; 7. Update Modbus FC: 1, 2, 3, 4, 5, 6, 15, 16 |
1
QUICK INSTALLATION GUIDE
1.1 Introduction
1.2 Application Notes
1.3 When does device send Uplink messages?
1.4 Default Configuration
1.5 Battery/ Power Supply
1.6 What's in the Package?
1.7 Guide for Quick Test
1.8 Installation
1.9 Payload Document and Configuration Tables
1.10 How to connect device to Back-end/ Network Server/ Coordinator
2
MAINTENANCE
2.1 Troubleshooting
2.2 Maintenance
3
ADVANCED GUIDE
3.1 Principle of Operation
3.2 Configuration
3.3 Calibration/ Validation
4
PRODUCT SPECIFICATIONS
4.1 Specifications
5
WARRANTY & SUPPORT
5.1 Warranty
5.2 Support
bottom of page