top of page

Sigfox Toilet Odor Sensor

SKU#
WSSFC-G4F-NH3
Replaced by
Replaced SKU
WSSFC-G4F-NH3 is a Sigfox-ready sensor with a built-in advanced gas sensor to measure the concentration of Ammonia NH₃ and H₂S to help assess odors in the Toilet. With a special design that increases the sensitivity of the sensor, even though it is mounted on the ceiling at a distance of up to 2.6m. The sensor has an ultra-low-power design and smart firmware that allows the sensor to run on 2 x 1.5VDC AA batteries for 2-5 years with 15 minutes of updating. The sensor supports all Sigfox network regions of the World. Typical application: Odor monitoring in private or public restrooms, toilets, and WC, helps to manage optimal cleaning staff.

For Applications

Indoor Air Quality Monitor, Gas Analyzing, Warehouse Monitoring, Odor Monitoring

High Sensitive Odor Sensor

Special design to get high sensitivity even the sensor is mounted on ceiling up to 2.6m

Sigfox-Ready

For Sigfox zone RC1, RC2, RC3, RC4, RC5, RC6, and RC7

Anti-tampering

Allow mounting the sensor on ceiling or high wall to prevent tampering

10-Year battery

Ultra-low-power design with high accuracy and stable

Sensor typeHigh-sensitive electrochemical type sensor with advanced amplifier circuit
NH₃ range0∼100ppm (or equivalent 0∼285.7ppm H₂S)
NH₃ tolerance limit 200 ppm
Repeatability/ Resolution/ Stability per month< 3% of reading/ 0.1ppm/ < 1% of reading/ month
Zero-point stability0∼0.15ppm
Ambient pressure101.3kPa ±10%
Sensor life2 years, in clean air
Working temperature-10∼50℃
Working humidity15∼90% RH
COMMUNICATION
Sigfox region supportsRC1∼RC7.
AntennaInternal antenna 2.0 dbi
ConfigurationVia Downlink or USB cable (software on PC provided free of charge)
Battery02 x AA size 1.5VDC, battery not included
RF moduleComplied to CE, FCC, ARIB standards
Electronics-40∼60℃ (AA Energizer® Lithium Ultimate battery installed)
Case/ protection gradeABS, indoor use, do not spray water directly on the device
Dimensions/ WeightDiameter 95mm x Height 40mm/ < 250g

Dimension

Application Notes

Only available for Logged-in members.
Please Log in or Register to access this information.

test

bottom of page